Aircrew Flight Equipment (AFE) CDC End of Course (EOC) Practice Test

These questions are part of the practice quiz. Start practicing

• How should all technical time compliance technical order (TCTO) deficiencies be submitted?
• Which position on the MXU-835/P communication subsystem allows for both transmission and receipt of communications?
• What is the classification of a mishap for any nonfatal injury or occupational illness that does not meet the definition of lost time?
• Why is it important for aircrew to regularly inspect their flight equipment?
• When used for C-5A/B and C-17 aircraft, how long is the HBU-6/P safety strap required to be?
• What safety equipment is typically included in a life vest?
• When inspecting equipment, which supply condition code is applied to material with more than six months shelf life remaining?
• How are individual harness adjustment straps attached to the MBU-12/P oxygen mask?
• When establishing processing direction for the ACCA, what angle deviation towards the wind is used?
• What is the recommended rate of descent when using the personnel-lowering device?
• When can you utilize the DOD identification code in a CMRS search?
• Which parachute model is designed for smaller framed crewmembers?
• Which communication capability is required for the Aircrew Flight Equipment Superintendent to respond to classified correspondence?
• What designator is used for the expendability status level of repair cost category of an item?
• The conventional munitions restricted/suspended listing should include what information?
• The amount of expendable supplies authorized is based on?
• Which ailment is a type of decompression sickness that involves the formation of bubbles in the body due to pressure reduction?
• What sewing operating procedure allows you to sew at a steady, even pace?
• What is the diameter of the MA-1 pilot chute canopy?
• Which of the following is a crucial characteristic of aircrew anti-G suits?
• What is the purpose of the skeleton shroud on the Future Assault Shell Technology helmet?
• What is the primary use of the automatic ripcord release in the back automatic parachute?
• When is the drogue parachute released during the deployment of the ACES II system?
• Which item generally requires continual restocking based on supply lines?
• What principle of explosive safety is intended to minimize the overall risk during an explosive operation?
• Who is primarily responsible for enforcing explosive limits at the operating location?
• By what date must aircrew flight equipment (AFE) submit their CAD/PAD forecast each year?
• What is the role of a higher headquarters in mission accomplishment?
• Which supervisory measurement area focuses on training?
• Which component of the panoramic night vision goggle houses the adjustment mechanisms for interpupillary distance and tilt?
• If a Top Secret telephone calls a Secret telephone, what classification is displayed on both devices?
• Which DOD and Air Force forms are used when requesting an item that does not have a federal stock number assigned or when additional information is necessary for procurement?
• What is the required frequency for recurring training programs for infrequently maintained systems?
• What material commonly provides reinforcements in parachute construction?
• When donning the helmet with the AERP system, which locking position is the bayonet inserted into?
• When winding a bobbin, what should you remember to do?
• Which solution may be used to clean night vision goggles?
• What is the function of the mortar assembly on the ACES II parachute?
• What is the minimum signature required for maintenance document purposes?
• Which type of parachute requires manual activation for deployment?
• Why is it important to document discrepancies found by aircrew or maintenance personnel?
• What is a common feature of the equipment used in high-altitude jumps?
• Which portion of the ACCA is intended to remove and secure all classified information or material?
• What role does the survival knife play in aircrew emergency gear?
• What keeps the BA parachute deployment bag in the pack during deployment until three quarters of the canopy has deployed?
• If you find material requiring additional parts or components to complete the end item prior to issue during a routine equipment inspection, which supply condition code do you assign?
• What Air Force instruction requires your shop to have a budget?
• Which major component of protective breathing equipment is powered by the oxygen generator and recirculates the breathing gas within the system loop?
• What is the primary criterion for selecting trainers in the AFE program?
• When starting to sew, what should you hold for the first 1/2 to 1 inch of the seam?
• What type of manifold block is used for the CRU-60/P oxygen connector?
• How are the extra small (XS) and extra-extra small (XXS) HGU-56/P helmet sizes accommodated to the aircrew member?
• Who is responsible for ensuring test, measurement, and diagnostic equipment items due periodic inspection or special inspection are forwarded to PMEL before they are due?
• Within how many calendar days must a technical content manager respond to a routine report submission?
• What does CSIL stand for in relation to reporting training deficiencies?
• Which parachute component is crucial for an automatic deployment system?
• What is the maximum pressure allowed to the pilot's mask by the pressure relief valve?
• Which subassembly of a night vision goggle is responsible for filtering certain wavelengths of light?
• What is the function of the tension spring in a sewing machine?
• Which system does the Air Force utilize for the sustainment of CAD/PAD?
• What is the ideal storage condition for parachute deployment bags?
• How is the facepiece of the quick-don Scot 358 oxygen mask secured to the wearer's face?
• What type of clothing is typically worn under flight suits for thermal protection?
• Who is responsible for correcting all noted discrepancies in quality control?
• How must a recommended change to a technical order be identified?
• Who establishes the guidelines for assigning instructors for aircrew flight equipment continuation training?
• During O2 use, which portion of the aircrew eye respiratory protection (AERP) system provides a positive pressure condition in the MBU-19/P hood?
• The master inventory list remains valid until which condition occurs?
• How many modes of operation does the AERP system have?
• What determines the shelf life classification of a supply item?
• What percentage of participants must demonstrate aircrew contamination contrail area processing procedures in subsequent training classes?
• What is the recommended quantity of explosives to be present at an operating location during operations?
• Which aircrew flight equipment continuation training event is required before aircrew's first flight?
• Which source of supply manages and purchases common consumable items used by all military services and some civilian agencies?
• Who is typically one of the first to deploy on the Advanced Echelon team?
• What is a significant factor affecting O2 equipment performance?
• The MBU-20P oxygen mask provides operations up to what G-force?
• Which component is responsible for maintaining the shape of the canopy during free fall?
• How much must the edges overlap when repairing tears on the CWU 66P aircrew chemical ensemble?
• Which of the following is a critical documentation aspect for TMDE?
• The basic HGU-55/P helmet shell incorporates what feature to aid in retention of lightweight visors?
• How many M295s will the attendant use when performing the initial decon pat down process?
• Which document is prepared by a parent major command containing unit identification and mission specifics?
• What is the pressure difference required to open the valve on the MBU-12/P oxygen mask?
• What is the proper method for final threading of a bobbin on a sewing machine?
• What is the primary purpose of the tear-away system of the AERP system mask?
• In the context of ACCA, what does "Area 1 Station 1" specifically target?
• What is the primary purpose of the parachute pack on the C9 canopy?
• What is the established processing direction when setting up an aircrew contamination and control area once the consistent wind direction is determined?
• When are common hardware items authorized to be in the composite tool kit (CTK)?
• What information does the hazardous communication standard provide regarding workplace hazards?
• What does the "V" signify in the AN/AVS-9V Aviators Night Vision Goggles?
• When should the national item identification number (NIIN) be used on the conventional munitions restricted/suspended (CMRS) search screen?
• What type of feed does the Chandler 767 sewing machine have?
• Which style of parachute allows crewmembers to move about the aircraft to perform their duties?
• What agency has the primary responsibility for periodically calibrating test, measurement, and diagnostic equipment?
• Who can view the Air Force Technical Order (TO) catalog information about all active Air Force TOs?
• What essential training event must all aircrew complete before flight?
• What distinguishes the MBU-20P from the MBU-20A/P oxygen masks?
• What is the minimum signature requirement for maintenance document purposes as per the 00-20-series technical orders?
• Which personnel would most likely be involved in operations security?
• What does the supply condition code (SCC) G signify?
• What material is used to construct the C9 canopy on the pilot chute?
• When a person signs for a tool or piece of equipment, what are they accountable for until it’s returned?
• Which BA parachute model is used for premeditated jumps?
• How must the equipment used for aircrew flight equipment continuation training be marked?
• Who has the authority to waive the 7-level requirement for clearing "Red-X" discrepancies?
• If the thermal radiation curtain is closed, what must be in place regarding the peephole cover?
• The purpose of the "dummy" cartridge contained in the Scot release is to...
• In parachuting, what does a deployment bag primarily function to do?
• During equipment inspection, which supply condition code (SCC) applies to material that is economically repairable and requires repair, overhaul, or reconditioning?
• What is the primary purpose of personal protective equipment (PPE) in an aviation environment?
• What is the usual classification level of Special Instructions (SPINS)?
• What does a loss of lens demist indicate when using the CQU-7/P blower?
• Which individual designates in-process inspection personnel when automated certification rosters are unavailable?
• What is the horizontal field of view of panoramic night vision goggles?
• What part of the JHMCS is responsible for providing an electrical signal that represents the pilot's head position?
• Which supply control document lists the status of accountable and controlled assets?
• What action changes the classification of a personal identification number (PIN)?
• An Air Force tasking order directs the use of airpower assets for how long?
• On what axis does the stitch forming mechanism of the Consew 206 RB sewing machine rotate, and what turns the hook?
• How many pounds can each ring on a 463L pallet restrain?
• Which supply condition code indicates that material is in good condition and ready for issue?
• What must be done with serviceable and unserviceable explosive items?
• What is the classification of a mishap resulting in hospitalization of three or more people?
• Who is responsible for ensuring that personnel who may be tasked for fill positions on aircrew contamination control area team remain fully qualified in ACCA functions at all times?
• What is the primary purpose of the aircrew contamination control area?
• What percentage of repacked parachute assemblies requires quality control inspection weekly?
• What is the position on the MXU-835/P communication subsystem that is designated for listen-only functionality?
• What is the appropriate date entry format for an aircraft form for 7 Dec 2009?
• Who is responsible for developing a rotation plan to ensure all assigned aircrew flight equipment technicians are trained?
• Which section serves as the primary focal point for the vast majority of supply orders or questions relating to supply?
• A complete set of air cargo pallet nets consists of how many side nets?
• What is the primary purpose of installing a finger guard on a sewing machine?
• What modification is used for the MIL-G-635 goggles for integration with helmets and oxygen masks?
• Who determines the depth of investigative effort required for each mishap?
• What is the only authorized color for additional attachments to the accessory rail connector rails?
• Which component of the Joint Helmet Mounted Cueing System (JHMCS) provides the symbologies projected onto the visor?
• Which publication offers instructions for changing technical orders?
• What ETIMS feature enables TO users to view properly formatted numbered and indexed electronic technical orders?
• What type of physical fitness is emphasized for aircrew as part of their training program?
• What is the frequency of inspections on all aircrew flight equipment training devices and aids?
• Which format would normally indicate a calibration due date of 8 JANUARY 2009 on an inspection label for a test measurement and diagnostic equipment item?
• While in Training mode, how often does the Cybernetic Parachute Release System (CYPRES) update the ground pressure value?
• Which type of harness is commonly used in ejection seat systems?
• What does the high-speed visor incorporate to provide friction that will hold the visor in up to 600 knots equivalent air speed?
• What form documents each discrepancy found by aircrew or maintenance personnel noted around flights?
• Which screen displays the complete and real-time information for all technical orders?
• What is the main purpose of the AERP system?
• What is the approximate size of the battery that powers the MXU-835/P?
• What type of training is event LL06 primarily focused on?
• What secures the nape strap pad to the helmet shell on the HGU-56/P helmet?
• Which documentation do aircrew flight equipment personnel maintain for historical purposes regarding assigned aircraft?
• Which of the following must be protected under the crypto security component of communications security (COMSEC)?
• What is the minimum overlap required for effective repairs on chemical ensembles?
• Which standards require chemical manufacturers and distributors to provide information about chemical product hazards?
• What type of information does the CMRS search screen primarily provide?
• Which source of supply allows items to be made according to the customers' specifications?
• How often must aircrew flight equipment continuation training lesson plans be reviewed?
• At what G force is the combat edge bladder inflated during flight?
• Which system provides Air Force planners access to data that is Air Force unique?
• For how many fiscal years in advance do we write our budgets?
• What primary responsibility does the AFE Superintendent have regarding technician training?
• Who is responsible for developing and maintaining standard manpower and logistics details for each unit type code?
• Which element of supply would you contact if you wanted to obtain individual mobility equipment?
• How do supervisors report training deficiencies in skills taught in the initial skills course?
• What is the primary function of the hook driving shaft in a sewing machine?
• What does the regulated portion of the CRU-120/P connector do?
• Approximately how many days of continuous reading is the expected life of the hygrometer's batteries?
• A red streamer installed on a back-style parachute indicates it has what kind of feature?
• When pallets are stored outside, what is required for each stack of ten pallets?
• What determines the hose and tether lengths for the CQU-7/P blower?
• What is the maximum airspeed, in knots, that the Advanced Concept Ejection Seat (ACES II) system can operate at?
• How frequently are reviews of change proposals sent to non-pilot units for comment resolution matrix?
• Which part of the MXU-835/P subsystem is responsible for audio monitoring?
• What color are low pressure oxygen cylinders typically?
• What type of item is typically listed in allowance documents?
• What is the focus of training event LL07?
• What is the main role of the TMDE Monitor?
• What are the three major components of the back automatic parachute?
• Who is responsible for dividing manpower into groups or teams by color when setting up an ACCA?
• What wattage light bulb is typically used for a night vision goggle (NVG) test lane?
• What program involves the investigation, study, and control of compromising emanations from telecommunications systems?
• Which supply condition tag would you use to identify a condemned G-suit awaiting pickup from supply?
• How many shipper declaration forms for dangerous goods are necessary when shipping hazardous material?
• What type of design is typically used in military helmets to enhance comfort and fit?
• What is the ERRC designator code that identifies due-in from maintenance items?
• Which technical order TO number indicates electronic or internet access distribution?
• How many days of bare base operations must logistics details sustain in support of contingency missions?
• The responsibility of a person to compensate for property lost, destroyed, or damaged because of their mismanagement or negligence is known as what type of liability?
• What is one key feature of modern flight helmets used by aircrew?
• Which Air Force instruction outlines the requirements for aircrew flight equipment continuation training programs?
• Which aircrew laser eye protection (ALEP) device has lenses housed in a Low Pro Wrap frame?
• Which component of the CRU-120/P provides overpressure protection when the vest is not worn?
• Which piece of equipment is essential for maintaining vision in low-light conditions during flight?
• What does the term 'technical content manager' refer to?
• Which component is used to engage the clutch on the Consew 206 RB sewing machine's motor?
• The CRU-122/P is qualified for maximum altitude flights up to how many feet?
• The continuous flow oxygen system provides adequate oxygen for flight up to what maximum altitude?
• What is the primary purpose of conducting mishap investigations?
• Which training event includes information on hazards associated with improper wear of aircrew clothing items?
• What type of funding is used for expenses that your unit has to pay for?
• What is required for the training equipment marked "FOR TRAINING USE ONLY"?
• Which supervisory measurement area is concerned with an Airman’s time?
• How long is the time delay for the reefing line cutters to fire on the ACES II parachute?
• Who is responsible for developing the Air Force Master Lesson Plans for AFE continuation training?
• Which sewing machine feed type allows for smooth transitions when working with various materials?
• What is a limiting factor in mission accomplishment?
• Who must sign off a red symbol entry for a maintenance task?
• What is the main function of the emergency flotation device in aircrew flight equipment?
• Within how many days must all adjustments or corrections to accountable records be accomplished following initial comparison of the count of record balance?
• Who reviews personalized lesson plans used in aircrew flight equipment continuation training?
• What temperature and relative humidity is ideal for working with parachutes?
• What letter shape is formed when threading the tension and thread controller assemblies on a sewing machine?
• How many incomplete packages are allowed per lot and condition code for each storage structure?
• Which source of supply is responsible for cradle to grave management of every Air Force weapon system?
• Which type of unit type codes information includes primary mission aircraft inventory?
• What is the maximum stitches per minute speed on the Consew 206 RB sewing machine motor with clutch?
• On what type of forms are in-process inspections documented?
• Where must electronic technical order (e-TO) content reside to allow an e-Tool to be disconnected?
• What is the purpose of technical orders (TO) in maintenance?
• How often must aircrew provide documentation for aircrew flight equipment training?
• How long is the deployment yoke on the ACES II drogue parachute?
• Which function does an oxygen generator serve in flight equipment?
• How many sections are designed for operational capability statements?
• What term is used to describe critical information derived from seemingly unrelated elements of information?
• What should be the priority during donning procedures in a contaminated environment?
• How should the tear-away pull knobs of the AERP be positioned during wear?
• Which event emphasizes the completion of comprehensive fit checks for ejection seat equipment?
• In terms of aircrew operations, what is vital to ensure complete operational readiness?
• How are aircrew flight equipment fit checks documented?
• How often should equipment be sent to PMEL for calibration?
• Which expendability, recoverability, and reparability code indicates an expendable user repair expense item?
• From whom does a unit receive the air tasking order?
• What impact does over/under production have in a resource constrained environment?
• How is the C9 canopy best described?
• What does AFE stand for in the context of aviation safety?
• Which form is used to change an authorization on an allowance source code?
• What is a concept of operations designed to provide?
• What is required for the storage of hazardous materials?
• Which element of supply would you contact to turn in equipment?
• What search method is the preferred option for finding information using the conventional munitions restricted/suspended (CMRS) search screen?
• What symbol is used for equipment that has gone overdue until the aircraft goes off alert status?
• When an attack is imminent, personnel should take what immediate action?
• Which night vision goggle assembly includes diopter adjustments for variations in user eyesight?
• If a specific common tool is needed, where will it be referenced in the technical order (TO)?
• What product or system identifies pilot units?
• What is a key consideration when using parachute equipment in adverse weather conditions?
• What part of the hazardous communication standard is the fundamental building block for the HAZCOM program?
• What do all cartridge actuated devices and propellant actuated devices (CAD/PAD) have?
• What combines to ensure efficiency in aircrew operations amidst resource limitations?
• In a contaminated situation, which items should be donned first?
• What is the correct date entry format for an aircraft form dated 12 July 2015?
• What process identifies, analyzes, and controls critical information about military operations?
• What aspect of aircrew flight equipment enhances situational awareness?
• During which phase do aircrew flight equipment personnel process aircrew members through the contamination control area?
• An example of an expendable supply item is?
• The speed capability of a sewing machine is primarily determined by?
• How does the deployment yoke contribute to the parachute function?
• What is the primary purpose of the conventional munitions restricted/suspended system?
• What type of feed does the Consew 206 RB sewing machine have?
• Which form determines the request for an item without a federal stock number?
• Within what preset altitude range is the Scot automatic release unit operational?
• A failure of the CQU-7/P blower is indicated to the wearer by which of the following?